Commercial & Industrial Monoblock Heat Pump for Swimming Pool SPA Farm Pond Hot Spring 60º C Water Outlet Air Source SPA Heat Pump

Product Description

Product Description

Commercial on-off SPA heat pump

Feature
Product features:
* Applicable ambient temperature:-15ºC~45ºC
* Max outlet water temperature:60ºC
* R410a Eco-friendly refrigerantTop configuration, best quality
* Operates all day and is unaffected by the weather
* High-Efficiency A+++ Energy Level
* The unit has a wide range of applications

1. WIDELY USED
The Commercial Pool heater heat pump effectively improves the safety of the swimming pool heating constant temperature. It is widely used in villa (family) swimming pool, spa club swimming pool, large swimming pool and other places.

2. Constant temperature
Small temperature fluctuation, precise control of water temperature.
3.Core component
Compressor:
Using the famous brand of EVI technology compressor, reliable operation at -30ºC low temperature environment, strong heating.
When the outdoor temperature is very low, the heat exchange capacity of the outdoor unit is reduced, the return volume of the normal air return port of the general compressor is reduced, and the compressor power is reduced, and the best effect cannot be achieved. However, by supplementing the cooling gas through the intermediate pressure return air jet, the exhaust volume of the grain wheel compressor is increased, the circulating refrigeration dose of the indoor unit heat exchanger heating is increased, and the actual heat is increased. Therefore, it is more suitable for cold areas.

Titanium heat exchanger :
It is a kind of heat exchange equipment made of high quality titanium pipe to transfer part of the heat of the hot fluid to the cold fluid, because of its excellent properties of strong corrosion resistance, so the service life of the heat exchanger is long, and the maintenance cost is less in use.

Eco-friendly refrigerant:
Using of R410 refrigerant, no exhaust gas, waste water, waste residue discharge during the operation of the unit, friendly to the environment.

Fin heat exchanger:
Fin heat exchanger consists of annular return air design, high utilization rate, large windward area; The upper and lower structure of the heat pump unit is separated to achieve a good working temperature in each area of the unit, which improves the heat transfer effect of the evaporator and inhibits the generation of noise

3. MULTIPLE NOISE REDUCTION
- New structure and pipeline optimization design, effectively avoid internal pipeline tremor.
- The special heat pump compressor is used, and the external sound absorbing cover is fully sealed.
- The structure and parts of the main engine are treated with sound absorption technology.
- Low noise anti-tremor axial flow vane design.
- The design of the special compound shock absorber plate has better effect of shock absorption and noise reduction.

4.Intelligent Remote Control Technology
The Commercial Pool heater heat pump can be interconnected with mobile phones, computers and other equipment to realize multi-online remote control, real-time monitoring of the remote operation status of the unit, and at the same time has the functions of intelligent remote power on/off,  parameter setting, fault detection, fault alarm, etc., which is not only convenient for management but also can reduce the cost of employment.


5.Complete model
Unit model specifications are complete, suitable for various sizes of home, villa, commercial swimming pool. For large swimming pools, modules can be assembled according to the actual load size.

6.Modular Design And Flexible Installation
According to the site characteristics of the installation site, a variety of combined connection methods can be selected, which can realize the parallel use of multiple unit modules to meet different needs.
The compressor starts in stages, runs in a balanced manner, and reduces the
impact of the starting current of the unit on the power grid.

7.Energy efficient, save money
The use of heat pump technology, the unit directly heating pool water, the annual average energy efficiency of more than 5.0, compared with the traditional boiler + plate heat exchanger heating method, the operating cost can save 70%-80%.

8.Safe and reliable
Water and electricity isolation, no combustion, no leakage, no leakage, no pollution, greatly reduce the risk of electric shock, poisoning, explosion, safety and environmental protection.

9. Unit durability
Built-in double process titanium coil heat exchanger, effective resistance to corrosion, so that the life of the unit is fully guaranteed.

Water and electricity isolation, no combustion, no leakage, no leakage, no pollution, greatly reduce the risk of electric shock, poisoning, explosion, safety and environmental protection.

10.Multi-defrosting Technology
The multi defrosting technology of the heat pump makes the heat pump unit defrost quickly, and completely eliminates the hidden danger of frost water accumulation into ice.

Commercial pool heat pump system installation connection diagram

Product Parameters

Company Profile

Guanadong Luckingstar New Energy Co., ltd, as one of the top 10 heat pump brands from China, has beendedicated to producing high-qualitly heat pumps since its establishment in 2006. Luckingstar heat pumpfactory covers an extensive area of 75,000 square meters and is equipped with 7 automatic production lines.This substantial infrastructure enables to achieve an annual production capacity of around 500,000 units of heatpumps. Luckingstar places great importance on ensuring the quality of their products, Luckingstar haveestablished 5 professional performance test laboratories specifically desianed for air source and water sourceheat pumps, These state-of-the-art laboratories are capable of operating in extreme temperatures as low as-41.5°C and have a capacity range of 1 to 500 kw.Thanks to the unwavering commitment to quality,Luckingstar heat pumps have gained popularity worldwide and have been successfully exported to more than40countries including Europe, Asia, Africa ,Australia and America etc.areas.
Q: Who are we?
A: We are a professional heat pump manufacturer with R&D, lf you are looking for a lead-
ing heat pump supplier, please contact us immediately!

Q: can you do OEM/ODM/OBM?
A: Yes, we can do OEM / ODM /OBM which depends on your requirement , we are familarwith all kinds of cooperations.
 
Q: What's your MOQ?
A: For official orders, our MOQ is a full container load of 40-foot container.

Q: What's your lead time for orders?
A: For samples ; 10-20days ; For mass orders: 30-35 days to be discussed.

Q: What's the payment terms?
A: Normally by T/T,Samples/LCL orders: 100% paid before production;Mass orders: 30% down payment, balance paid beforeshipment.

Q: What's your production capacity?
A: Inverter Swimming Pool Heat Pump: 150-300pcs/production line/dayInverter Space Heat Pump: 100-200pcs/production line/dayDomestic Hot Water Heat Pump: 150-300pcs/production line/dayCommercial Heat Pump: 30-100pcs/production line/day

Q: How long is your warranty?
A: 24 months for complete units, 36 months for main components like compressors, heatexchangers.3-5year warranty is available with added cost.