Europe Popular Air Source Pool Heater Commercial Swimming Pool Heat Pump for Gym Hotel Resort

Product Description

Product Description

ON-OFF commercial swimming pool heat pump
Luckingstar Commercial Pool heater series unit is the world's leading new type of pool constant temperature heating equipment, it uses the original constant temperature technology and efficient titanium alloy heat exchanger, absorb low-grade heat energy in the air, to heat or maintain the pool temperature, completely breaking the pattern of relying on non-renewable energy to heat. Effectively improve the safety and flexibility of swimming pool heating and constant temperature, widely used in villa (family) swimming pool, spa club swimming pool, large swimming pool and other places.
Feature

1. WIDELY USED
The Commercial Pool heater heat pump effectively improves the safety of the swimming pool heating constant temperature. It is widely used in villa (family) swimming pool, spa club swimming pool, large swimming pool and other places.

2. Constant temperature
Small temperature fluctuation, precise control of water temperature.
3.Core component
Compressor:
Using the famous brand of EVI technology compressor, reliable operation at -30ºC low temperature environment, strong heating.
When the outdoor temperature is very low, the heat exchange capacity of the outdoor unit is reduced, the return volume of the normal air return port of the general compressor is reduced, and the compressor power is reduced, and the best effect cannot be achieved. However, by supplementing the cooling gas through the intermediate pressure return air jet, the exhaust volume of the grain wheel compressor is increased, the circulating refrigeration dose of the indoor unit heat exchanger heating is increased, and the actual heat is increased. Therefore, it is more suitable for cold areas.

Titanium heat exchanger :
It is a kind of heat exchange equipment made of high quality titanium pipe to transfer part of the heat of the hot fluid to the cold fluid, because of its excellent properties of strong corrosion resistance, so the service life of the heat exchanger is long, and the maintenance cost is less in use.

Eco-friendly refrigerant:
Using of R410 refrigerant, no exhaust gas, waste water, waste residue discharge during the operation of the unit, friendly to the environment.

Fin heat exchanger:
Fin heat exchanger consists of annular return air design, high utilization rate, large windward area; The upper and lower structure of the heat pump unit is separated to achieve a good working temperature in each area of the unit, which improves the heat transfer effect of the evaporator and inhibits the generation of noise

3. MULTIPLE NOISE REDUCTION
- New structure and pipeline optimization design, effectively avoid internal pipeline tremor.
- The special heat pump compressor is used, and the external sound absorbing cover is fully sealed.
- The structure and parts of the main engine are treated with sound absorption technology.
- Low noise anti-tremor axial flow vane design.
- The design of the special compound shock absorber plate has better effect of shock absorption and noise reduction.

4.Intelligent Remote Control Technology
The Commercial Pool heater heat pump can be interconnected with mobile phones, computers and other equipment to realize multi-online remote control, real-time monitoring of the remote operation status of the unit, and at the same time has the functions of intelligent remote power on/off,  parameter setting, fault detection, fault alarm, etc., which is not only convenient for management but also can reduce the cost of employment.


5.Complete model
Unit model specifications are complete, suitable for various sizes of home, villa, commercial swimming pool. For large swimming pools, modules can be assembled according to the actual load size.

6.Modular Design And Flexible Installation
According to the site characteristics of the installation site, a variety of combined connection methods can be selected, which can realize the parallel use of multiple unit modules to meet different needs.
The compressor starts in stages, runs in a balanced manner, and reduces the
impact of the starting current of the unit on the power grid.

7.Energy efficient, save money
The use of heat pump technology, the unit directly heating pool water, the annual average energy efficiency of more than 5.0, compared with the traditional boiler + plate heat exchanger heating method, the operating cost can save 70%-80%.

8.Safe and reliable
Water and electricity isolation, no combustion, no leakage, no leakage, no pollution, greatly reduce the risk of electric shock, poisoning, explosion, safety and environmental protection.

9. Unit durability
Built-in double process titanium coil heat exchanger, effective resistance to corrosion, so that the life of the unit is fully guaranteed.

Water and electricity isolation, no combustion, no leakage, no leakage, no pollution, greatly reduce the risk of electric shock, poisoning, explosion, safety and environmental protection.

10.Multi-defrosting Technology
The multi defrosting technology of the heat pump makes the heat pump unit defrost quickly, and completely eliminates the hidden danger of frost water accumulation into ice.

Commercial pool heat pump system installation connection diagram

Product Parameters

Model		LWH-030SC	LWH-050SC	LWH-100SC	LWH-150SC	LWH-200SC	LWH-250SC	LWH-300SC	LWH-400SC
Heating capacity	kW	13. 5	22.8	45.7	68.6	91.5	114.5	145	190
	BTU/h	46000	77800	155900	234100	312300	390800	494900	648500
COP		5.62	5.7	5.57	5.7	5.71	5.72	5.7	5.8
Cooling capacity	kW	8 2	13.5	30.0	45.0	60.0	75.0	90.0	120.0
	BTU/h	27900	46000	102400	153600	204800	256000	307200	409600
EER		3. 04	3.14	3.13	3.00	3.00	3.00	3.05	3.07
Powwer supply		220V/1N/50Hz	380V/3N/ 50H
Heating input power	kw	2.4	4.0	8.2	12.0	16.0	20.0	25.4	32.7
Cooling input power	kw	2.7	4.3	9.6	15.0	20.0	25.0	29.5	39.0
Heating input current	A	11.0	7.2	14.7	21.5	28.6	35.8	45.4	58.5
Cooling input current	A	12. 3	7.2	17.2	26.8	35.8	44.7	52.7	69.7
Compressor type		Scroll*1		Scroll*2				Scroll*4
Compressor brand		Copeland
Throttle type		Emerson thermal expansion valve / Electronic expansion valve(EEV)
Fan type		Low noise high efficiency axial type
Fan direction		Horizontal	Vertical
Fan No.		1	1	2	2	2	2	4	4
Fan input power	W	90	250	250	550	750	750	750	750
Fan Speed	RPM	750	250	850	910	940	940	940	940
Evaporator fin type		Hydrophilic aluminium
Evaporator tube type		Innergroove tube
Heat exchanger ype		Titanium in PVC
Heat exchanger No.		1		2				4
Controller type		Intelligent & LCD
Ambient Temperature		(-10°C~+45°C)
Refrigerant		R22/R417A/R410AVR407C
Low pressure protection		Yes
High pressure protection		Yes
Automatic defroting system		Yes
Overioad protection		Yes
Noise in 1 metér	dB(A)	≤54	≤56	≤60	≤65	≤66	≤68	≤71	≤72
Water pipe size	mm	50	50	63	63	90	90	110	110
Water flow volume	m³/h	4	6	13	19	25	33	41	54
Cabinet		power coated steel / Stainless steel
Unit Size	mm	1110x470x680	860x840x1120	1148x815x1170	1585x850x1525	2006x1006x1960	2010x1165x2035	2010x1165x2035	2120x2006x2110
Packing Size	mm	1140x495x790	910x910x1260	1610x905x1310	1690x940x1750	2120x1160x2120	2120x1265x2180	2120x1265x2180	2200x2100x2250
Net Weight	kg	68	125	270	460	650	750	900	1100
20'/40"/40" HQ	Set	44/92/138	12/24/48	6/13/13	6/13/13	5/11/11	4/9/9	4/9/9	2/5/5

 

Company Profile

Guanadong Luckingstar New Energy Co., ltd, as one of the top 10 heat pump brands from China, has beendedicated to producing high-qualitly heat pumps since its establishment in 2006. Luckingstar heat pumpfactory covers an extensive area of 75,000 square meters and is equipped with 7 automatic production lines.This substantial infrastructure enables to achieve an annual production capacity of around 500,000 units of heatpumps. Luckingstar places great importance on ensuring the quality of their products, Luckingstar haveestablished 5 professional performance test laboratories specifically desianed for air source and water sourceheat pumps, These state-of-the-art laboratories are capable of operating in extreme temperatures as low as-41.5°C and have a capacity range of 1 to 500 kw.Thanks to the unwavering commitment to quality,Luckingstar heat pumps have gained popularity worldwide and have been successfully exported to more than40countries including Europe, Asia, Africa ,Australia and America etc.areas.
Q: Who are we?
A: We are a professional heat pump manufacturer with R&D, lf you are looking for a lead-
ing heat pump supplier, please contact us immediately!

Q: can you do OEM/ODM/OBM?
A: Yes, we can do OEM / ODM /OBM which depends on your requirement , we are familarwith all kinds of cooperations.
 
Q: What's your MOQ?
A: For official orders, our MOQ is a full container load of 40-foot container.

Q: What's your lead time for orders?
A: For samples ; 10-20days ; For mass orders: 30-35 days to be discussed.

Q: What's the payment terms?
A: Normally by T/T,Samples/LCL orders: 100% paid before production;Mass orders: 30% down payment, balance paid beforeshipment.

Q: What's your production capacity?
A: Inverter Swimming Pool Heat Pump: 150-300pcs/production line/dayInverter Space Heat Pump: 100-200pcs/production line/dayDomestic Hot Water Heat Pump: 150-300pcs/production line/dayCommercial Heat Pump: 30-100pcs/production line/day

Q: How long is your warranty?
A: 24 months for complete units, 36 months for main components like compressors, heatexchangers.3-5year warranty is available with added cost.